If you want to learn more, please visit our website MDL.
Difference between Street Lights and Parking Lot Lights
What are LED Street Lights?
LED street lights are a type of light that is used on streets and roadways. They are usually installed on poles in an effort to improve safety and provide light at night. The advantage of LED streetlights is that they are long-lasting and energy efficient. They use less power than other types of lights, which means they cost less money to operate over time. They are also more durable than other types of lights, which means they will last longer before needing to be replaced. The main disadvantage of LED street lights is that they are more expensive to purchase than other types of lights.
What are LED Parking Lot Lights?
LED parking lot lights are used in parking lots to illuminate the area and provide security. They are usually installed on poles in an effort to improve safety and provide light at night. The advantage of LED parking lot lights is that they are long-lasting and energy efficient. They use less power than other types of lights, which means they cost less money to operate over time. Another advantage of LED parking lot lights is that they are brighter than other types of lighting. This makes them ideal for illuminating a large area and providing security at night. The main disadvantages of LED parking lot lights are that they cost more to purchase than other types of lighting.
What are the similarities between LED Street Lights and LED Parking Lot Lights?
In general, these two lights are the same in the following ways:
- They use the same type of LEDs, such as SMD
- They use same type of outdoor LED Driver, such as Meanwell or Sosen driver
- Their structure&appearance is similar
- Both prefer using photocell sensor
- Both are installed on poles usually
They are both energy efficient and long-lasting. They can be used to illuminate large areas at night, making them ideal for parking lots and streets. They are brighter than other types of lights, which makes it easier for people to see where they&#;re walking or driving at night.
What is the difference between
LED Street Lights and LED Parking Lot Lights?
Beam angle
It is important to understand that streetlights project light out to the sides and not forward, because they are often mounted on roadsides to avoid wasting illumination beyond the road. Forward throw is a term used in the industry for forward illumination. This type of light is referred to as Type II. It will vary by manufacturer but is usually around 150 degrees wide and 70 degrees forward.
Parking lot lights are used to illuminate a wide outdoor space, typically in all directions. For instance, the popular T3 model&#;s light angle varies from 120-130 degrees wide by 100-110 degrees forward.
Color Temperature
The color temperature of a light is measured in degrees Kelvin (K) and indicates the hue of its output in relation to daylight. The lower the number, the warmer the light appears; higher numbers are cooler. For example, an incandescent bulb has a warm glow because it emits yellow-orange light at about K.
Municipalities often choose to illuminate streets with orange-yellow or yellow-white light, usually at a color temperature of K or higher. These warmer tones are preferred for street lights because they are better for the environment as well as the dark sky.
Instead of choosing the warmer, more natural tones of amber and yellow for parking lots, many business owners choose to illuminate their establishments with white light. The cooler tones are preferred for parking lots because they increase visibility and security.
Installation
LED street lights are usually with a simple pole mount installation while LED Parking Lot lights has various types of installation, such as below:
A cast aluminum mast arm adapter allows you to attach the fixture head to a standard horizontal steel tenon arm, or on top of a post.
- Square pole mount&Round Pole Mount
The standard mounting arm is simple to install and can be used with existing round or square poles for round or square pole retrofit installations.
- Yoke mountThe versatile mount allows the unit to be installed on a square pole, on a wall, or on the ground as an uplight.
Types of photocells
A street light typically uses a seven-pin connector that allows for wireless control by way of a DALI interface. Parking lot lights are typically controlled using a photocell or a wired connection that allows for digital communication, but wireless connectivity is becoming more common.
Application
LED Street Lights
LED street lights are used at a variety of locations, including expressway ring roads, intersections and major thoroughfares. They are also installed outside industrial facilities and warehouses, in areas such as loading docks or parking lots.
LED street lights are also used in residential areas, where they provide security and safety for pedestrians and drivers. They can be installed on curbs or sidewalks, or mounted on poles in traffic medians or alongside roadways.
LED Parking Lot Lights
LED parking lot lights are used to illuminate parking lots and garages. They can be mounted on poles or installed on the ceiling, depending on your needs. LED parking lot lights provide security for drivers and pedestrians, as well as added convenience for customers who need to find a space at night.
Conclusion
For more information, please visit Underground Parking Lot Lights supplier.
LED parking lot lights are a great way to illuminate your parking lots and garages. They provide security, safety and convenience for drivers and pedestrians alike. If you&#;re looking for a way to increase visibility in your parking lots or garages, LED Parking Lot lights are the perfect solution.
LED Street Lights are an environmentally friendly and cost-effective way to light up your streets. They can be mounted on poles or installed on the wall, depending on your needs. LED street lights provide security for drivers and pedestrians, as well as added convenience for customers who need to find their way in the dark. If you are looking for a solar-powered street light, you may visit this web:https://solarlightingled.com/.
Spread the love
When it comes to lighting up a parking lot at night, it can become expensive if done incorrectly. Property owners need to think about lighting a parking lot with enough coverage to eliminate dark areas, improve visibility, and create an inviting experience for visitors. Poorly lit parking areas can encourage criminal activity and make employees and customers feel unsafe walking around in the evening. If replacing or upgrading your existing parking lot lighting seems like an unreasonable expenditure, weigh the alternative &#; can you afford not to do it? If your parking lot lighting is not already using LEDs, it most likely utilizes inefficient legacy technology and costs more to run long term. Between the energy cost reduction, the elimination of maintenance, and ultra-long lifetimes, you will find an appropriate ROI that can offset the initial expense of an upgrade. While doing your preliminary research, here are some important questions to consider before you upgrade your parking lot lighting.
1. Which Lighting Technology Is Right For My Property?
High-Intensity Discharge (HID) lamps have an arc that passes between two electrodes in a pressurized tube. This causes various metallic additives to vaporize and release significant light. The electricity first enters through the ballast in the fixture containing the HID lamp. The starter inside the ballast provides the high-voltage jolt of electricity, which ignites the HID bulb. Once the electricity enters the base of the HID lamp, it flows into the sealed glass envelope which contains gas and metallic salts. This gas helps with the strike of light and once the gas is excited, it heats up and vaporizes the metallic salts. After all this, chemical combustion produces artificial light. Continued use of HID increases costs associated with maintenance and nullifies potential energy savings over time. In addition to the increased overhead to run HID, their lifetimes do not normally exceed 20,000 hours and are subject to extreme color shifting over time.
Light-emitting diodes (LED) is a semiconductor light source that emits visible light when a current passes through the material. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. Overall, LED lighting is more efficient, which can be immediately measured. Unlike HID that requires bulky reflectors to direct light, LED luminaires can have molded optics that precisely direct light where it is needed.
In the past, HID has been a primary choice for parking lot installations because of the large amount of light that can be thrown from the fixture for sizable areas and its lower upfront cost. However, because of its inefficiency, it takes an extended amount of time to warm up before full illumination and the quality of light decreases significantly after only 10,000 hours. When you factor in the re-lamping and ballast replacements over the fixture lifetime, long term costs surpass the initial savings on installation. LEDs virtually eliminate all maintenance associated with lighting, and when combined with energy savings, produce a significant ROI that is hard to refute.
2. How Do I Get The Light Where I Need It?
Parking lot layouts are vastly different across the country and have a variable number of poles installed at the time of construction. Traditionally HID threw large pools of light to the ground, albeit inefficiently and often imprecisely. When weighing the option to upgrade to LED lighting, you will have to decide if you will keep the existing poles or replace them completely. With the efficiency that LED lighting brings, you can get more light with fewer luminaires by utilizing optics that distribute it precisely on the ground. After conducting a photometric study and getting a lighting layout, you can make an informed decision to utilize the existing poles or make adjustments to the quantity on-site. Another consideration aside from pole height and the distance between is the actual structural integrity of the poles themselves. In most situations, poles can be utilized for new lighting plans if they match the desired aesthetics you are looking for and it is typically more cost-effective to do such.
3. What Other Characteristics Make A Parking Lot Look Better?
What attributes make some commercial parking lots look better at night than others? What is their secret? More than likely the LED lighting was properly optimized for the application. In regards to lighting design, standards are determined by the experts at the Illuminating Engineering Society to benefit the public and ensure wellbeing. Lighting manufacturers offer many outdoor solutions for commercial parking lots and below are just a few to contemplate during the planning process.
Correlated Color Temperature (CCT)
The correlated color temperature of an LED luminaire defines the color appearance of the white light. Luminaire CCT is defined in degrees Kelvin, typically ranging from K (Warm Yellowish) to 6,700K (Bluish White Light). Most commercial LED parking lot lighting, especially automotive dealerships, utilize K CCT for optimum effect.
Color Rendering Index (CRI)
The color rendering index is a numerical rating of the ability of a light source to reveal the colors of various objects accurately in comparison to daylight conditions. LED lighting solutions with a high CRI are desirable in color-critical applications like retail stores, healthcare facilities, and car dealership lighting design.
Backlight, Uplight, and Glare (BUG) Ratings
BUG ratings are used to evaluate an LED luminaire&#;s optical performance concerning light trespass (backlight), light pollution (uplight), and the angle forward light (glare). These ratings are determined by the lumens that fall within certain zones of photometric test data, normally conducted a third-party testing facility. The system was originally developed by the Illuminating Engineering Society and the International Dark-Sky Association to calculate how much light was escaping into undesirable locations.
4. How Will Lighting Controls Benefit My Parking Lot?
The days of commercial properties leaving their lights on 24/7 and sustaining high energy costs are coming to an end now that LEDs have paired with controls. LED lighting luminaires incorporate drivers that can enable continuous dimming, where the shift from 100 to 10 percent is smooth and seamless (not tiered). When paired with passive infrared photo/motion (PIR) sensors, they can detect motion and adjust light output, as necessary. Even after the sensors have stopped detecting motion, adjustable time delay controls can keep lights on at full output for a predetermined amount of time before dimming down to the lowest setting and then off completely. Twist-lock photocontrol or photocell dimming accessories offer adjustable control solutions for outdoor LED luminaires and automatically adjust light levels from dusk to dawn.
Having innovative controls integrated with commercial LED lighting can further increase energy savings, reduce unnecessary light pollution, and provide operational insights. As the Internet of Things (IoT) enables people to connect a wide variety of items via the web, LED lights can be controlled digitally by precise amounts and get real-time reporting of how a building&#;s systems are performing. According to the U.S. Department of Energy&#;s Solid-State Lighting Forecast Report, between the years and , a cumulative energy savings of 62 quads (62 quadrillion BTUs) will be possible if the DOE&#;s goals for connected lighting and efficient LEDs are realized.
Making The Switch To LED
Since commercial LED lighting efficiencies have matured and controls become robust, now is the time to make the switch to capitalize on the savings. How do you choose the right lighting solutions for your parking lot? How do you know if the cost savings would justify the initial investment? Over the last 18 years, our lighting experts have been trusted to provide LED lighting solutions to over 18,000 installations all over the country. This experience can be used to assist you with your project, providing analysis, and lighting layouts to fulfill your specific requirements. Click below to get started!
Want to learn more about the benefits of LED lighting? Read more about them here. You can also learn more about our Dorado XLE and Dorado XLP LED parking lot lights that are assembled in the USA (Houston, Texas).
If you want to learn more, please visit our website Waterproof LED Tri Proof Linear Batten Light Fixture.