Rated

1

If you are looking for more details, kindly visit our website.

out of

5

by

Fowler

from

I'm glad I read the reviews.

I think I will stick to Fluke for DMMs and not much else after checking out this power analyzer product and reading the reviews about software-as-a-service making it completely useless. I will be purchasing the other vendor's product.

Rated

1

out of

5

by

Zach

from

Predatory practices

It&#;s sad to see that you spend thousands of dollars only to find you can&#;t get your data unless you pay for a subscription so you never truly own or can see your measurements unless you pay forever

Rated

1

out of

5

by

dany

from

really bad

I recently purchased the Fluke FC Power Monitor with high hopes for its performance and capabilities. However, my experience with this product has been nothing short of disappointing. Despite my efforts to generate reports using downloaded sessions, I encountered numerous issues. The software provided did not allow for proper analysis, and attempts to connect via USB proved futile, resulting in wasted time and effort. This power monitor has left me with a very negative impression. As a customer, I expected a more seamless and user-friendly experience, especially from a reputable brand like Fluke. I urge potential buyers to approach this product with caution and to thoroughly research alternative options before making a purchase. Fluke should address these issues promptly to maintain trust and satisfaction among its customer base. Overall, my experience with the Fluke FC Power Monitor has been deeply unsatisfactory, and I cannot recommend it based on my usage

Rated

1

out of

5

by

JPac

from

Don't waste your $$

Unless you use this daily and can account for the subscription cost through revenue from clients then don't waste your money. Totally useless without a subscription.

Rated

1

out of

5

by

NumberSix

from

No way to connect with this thing via USB

Ridiculous that I cant jsut plug this into my laptop and download the data. I am forced to use Fluke Connect, which requires a subscription.

Rated

1

out of

5

by

User123

from

Tool is completely useless

What is holding this back is the app. You need to use the app even to set up the local logging. You need a subscription to even use the meter in local mode. The mobile device needs to be connected to the internet and to the device at the same time.

Rated

1

out of

5

by

electro

from

Very Disappointed

This is a very expensive tool that requires a subscription for use. There is no way to pull the data off of the tool unless you buy the subscription. This is now a very expensive paperweight. Remember you will never own this instrument. This is a rental with a .00 down payment with a .00 a year lease.

Three Phase Energy Meter Wi-Fi,split phase,residential energy consumption,solar pv monitor,net energy metering, Modbus TCP/RTU

Introduction

The WEMT is a bi-directional, din rail, three phase Wi-Fi Energy Meter which can be used to monitor 3 phase 4 wire system(WYE connection) .

It is a highly integrated 3 phase energy meter with a Wi-Fi module embedded, which measures the voltage, current, active power(bi-directional), forward energy, and reverse energy of each phase.

It can report the energy data to the cloud service(IAMMETER or your own cloud service ) by Wi-Fi.

Key Features

Standard Package

No. Item Qty Remark 1 Wi-Fi Energy Meter 1 Wi-Fi Module Embedded 2 Split-core Current Transformer 3 150A, 250A or 500A CT optional 3 2.4G Wi-Fi Antenna 1

Applications

1. Solar PV System

• Exported/imported energy vs solar inverter production

• Electricity bill and solar PV system income statistics

  System and APP Demo

  Goto acrel to know more.

OVERVIEW OF SOLAR PV SYSTEM

BILLING AND INCOME REPORT

This report shows both total Grid Consumption & Electricity Bill, total Energy Exported & Income, and Balance, on daily/monthly/yearly basis.

TOTAL SAVINGS REPORT

This report shows Direct Self-use Rate and Total Saving(Money saved by consuming direct self-use energy instead of grid energy + income of exported energy to grid) of your solar PV system.

Monitor your solar PV system with a smart WiFi Energy monitor

Part 1: Insight into Your Photovoltaic System

Part 2: Optimizing Your Photovoltaic System

Monitor the solar PV in IAMMETER-1

Using a 3-Phase Energy Meter for Solar PV and Grid Consumption in a Split-Phase System

2. Electricity Usage Monitor/ Energy Monitoring System

• Real-time monitoring of electricity usage

• Electricity bill calculation on houly/daily/monthly basis

  System and APP Demo

OVERVIEW OF THREE PHASE ELECTRICITY SYSTEM

LIST OF POWER CONSUMPTION AND BILL

ENERGY USAGE AND BILLING REPORT

This report shows the statistics of Grid Consumption(kWh) and Electricity Bill on different time period (peak-to-valley) on daily/monthly/yearly basis.

ENERGY CONSUMPTION AND BILL FORECAST

Our system can give you the Energy Consumption and Electricity Bill forecast on monthly basis by learning from your historical energy consumption and billing method you set.

ADVANCED ENERGY CONSUMPTION ANALYSIS REPORT

Monitor electricity usage by a three phase energy meter

3. Home Automation

This 3 phase energy meter Wi-Fi has supported many famous open source home automation platforms, such as Home Assistant, Openhab, NodeRED, Domoticz, IObroker etc.., more details please refer to

How to use 3 phase energy meter of IAMMETER in Home Assistant, Openhab, NodeRED, Domoticz, IObroker etc..

How to Utilize IAMMETER's Product on a 3rd Party Server or Open Source Platform

The "hidden" features in the firmware of the Wi-Fi energy meter

Mobile App && IAMMETER-Cloud

When you have the 3 phase energy meter of IAMMETER, you can also use the service of IAMMETER-cloud. It is a very powerful system, especially in solar PV monitoring and energy consumption management.

Visit the demo account of IAMMETER

Please note, there will be different effects when you click the above link in PC browser(effect of web system) or app browser(effect of the app)

SOLAR PV SYSTEM

RESIDENTIAL ELECTRICITY SYSTEM

APP DOWNLOAD

Certificates

1. CE
2. FCC
3. RCM
4. RoHS

Integrate to the third-party platform

We provide our own IAMMETER cloud service and mobile APP for WiFi energy meters, to realize different applications, such as solar PV system monitoring, electricity usage monitor. Moreover, you can integrate our WiFi energy meters to other third-party platforms.

Home Assistant

Four ways to integrate IAMMETER`s energy meter into the home assistant

https://www.iammeter.com/docs/homeassistant

monitor-your-solar-pv-system-in-home-assistant

Openhab

https://www.iammeter.com/docs/openhab

NodeRED

https://www.iammeter.com/docs/nodered

Monitor your solar pv system in Nodered

HomeAssistant-InfluxDB-Grafana

https://www.iammeter.com/docs/homeassistant-grafana

Integrated with the third-party MQTT server

https://www.iammeter.com/docs/integrate-with-mqtt-server

Integrated with the third-party TCP/TLS/http server

https://www.iammeter.com/docs/integrate-with-thirdparty-server

REST API

https://www.iammeter.com/docs/integrate-with-PVOutput

Thingsboard

Use the WiFi energy meter in Thingsboard

Zabbix

Use IAMMETER`s Wi-Fi energy meter in Zabbix

Video tutorials

IAMMETER Energy monitor

Reference

What capabilities does IAMMETER offer?

Which type of electrical meter best fits your needs?

How do use the power meter with regard to your requirements

Use the 3 phase energy meter the way you prefer

EV-charger integration in IAMMETER

WEMT: New 3 phase energy meter,split phase,5A CT input, Modbus TCP/RTU

How to use the WiFi energy meter without the access of internet

Subscribing the instant value of the Energy meter

For more 3 phase power monitorinformation, please contact us. We will provide professional answers.