Mastering Installation of Liquid Tight Conduit.
Liquid Tight Conduit is a flexible non-metallic conduit that is used in various applications to provide protection and containment of electrical cables and wires. It is designed to be able to withstand harsh environments such as temperature fluctuations, moisture, and corrosion. Installing liquid tight conduit might seem like a daunting task, but with the right tools and techniques, it is fairly easy. In this article, we will discuss some key steps and tips to mastering the installation of liquid tight conduit.
Choosing the Right Type of Liquid Tight Conduit.
There are different types of liquid tight conduit available in the market and choosing the right type is important. Consider factors like the environment where it will be installed, the types of cables or wires it will contain and the level of strain on the cables. There are also different sizes and thicknesses of liquid tight conduit, so take the time to determine which size will accommodate the wires to be contained.
Preparing for the Installation.
Before beginning the installation, it is important to have all the necessary tools and materials. The tools required will include a wire cutter, pliers, a screwdriver, and a hacksaw. The materials required include the liquid tight conduit, connectors, clips and clamps, and the electrical cables or wires to be contained. Thoroughly inspect the conduit to ensure that there are no defects, kinks or bends.
Cutting and Fitting of the Liquid Tight Conduit.
Measure the length of the conduit required to fit the cables or wires and cut it to size using a hacksaw. Make sure to take into consideration the length between the fittings and the connectors. Slide one end of the liquid tight conduit onto the cable and push it in until it reaches the desired length. At the opposite end of the conduit, secure a connector using pliers and make sure it is tight.
Connection of the Liquid Tight Conduit.
To connect different pieces of conduit, use a connector. Slide the connector into the end of the first piece of conduit and tighten the screws using a screwdriver. Connect the second piece of conduit to the other end of the connector and tighten the screws again with a screwdriver. Repeat this step until the entire length of conduit is installed with connectors.
Securing and Supporting the Liquid Tight Conduit.
After installing the liquid tight conduit, it is important to secure it properly. Secure the conduit to the surface using clamps or clips and make sure that they are tightened securely. Installation of liquid tight conduit should be at a reasonable distance from light fixtures, junction boxes, or around corners. This way, it will be easier to make sure that the radius of the curve is not exceeded, and the wires are not exposed to too much strain.
In conclusion, it is important to master the installation of liquid tight conduit. Choosing the right type, size, and thickness of the conduit. Also, preparation is key before installation starts. Ensure all necessary tools and materials are available. Cutting and fitting of the liquid tight conduit is also another crucial step and knowing the measurements of the conduit you need is important. Connection of the liquid tight conduit requires connectors, and tightening the screws properly is key. Lastly, securing and supporting the liquid tight conduit should be done properly to prevent the wires from getting exposed to too much strain.
Should you have any questions or need assistance with the installation of liquid tight conduit, do not hesitate to contact us. Our team of highly skilled professionals are readily available to intervene.
If you are looking for more details, kindly visit Liquid Tight Flexible Metal Conduit Square-lock, Liquid Tight Non-Metallic Flexible Conduit, Non-Metallic Corrugated Conduit Manufacturers.