Patriot | Small Porcelain Screw-In Insulator (25 Pack)

13 May.,2024

 

Patriot | Small Porcelain Screw-In Insulator (25 Pack)

Features and Benefits
For use with wood posts
Fence wire: Poliwire, polirope, steel/aluminum wire
Suitable for: use as a line or corner post insulator
Fire resistant
Available in: 25 per box.

Contact us to discuss your requirements of porcelain insulators for sale. Our experienced sales team can help you identify the options that best suit your needs.

Insulators Catalog - Full Catalog (CA08051E)

Insulators Catalog - Full Catalog (CA08051E)

Insulator Catalog

Insulators

Distribution & Transmission

for 15-69kV Applications

www.hubbellpowersystems.com

Page 1 | January 2019

Table of Contents

PDI/VLS PDV /VLS

1. Veri*Lite™ Deadend & Suspension Insulators

VLLP QUADRI*SIL ® HI*LITE ® STATION POSTS GLASS BLP

2. Veri*Lite™ Line Post Insulators

3. Quadri*Sil® Insulators

4. Braced Line Post Insulators

5. Hi*Lite® Insulators

6. Station Post Insulators

7. Toughened Glass Insulators

Page 2 | January 2019

PDI/VLS

for 15-69kV Applications Veri*Lite™ Deadend & Suspension Insulators

Experience & Reliability

Page 1-3 | January 2019

PDI Mechanical Characteristics

0.625" (16mm) Diameter Rod Deadend Insulators

PDI/VLS

0.625 Dia. Pin

FORGED STEEL END FITTINGS

D

d

1.56

1.62

0.70 Dia. Hole

Length

Mechanical Characteristics

Diameter Inches (mm) D d

Standard Package Qty

Length Inches (mm)

Net Wt. pounds (kg)

Torsion ft-lb (N-m)

2 SML pounds (kN)

3 RTL pounds (kN)

4 Proof pounds (kN)

Catalog Number

No. of Sheds

Box Pallet

4010150215

5

12.50 (318) 17.50 (445) 18.75 (475) 25.00 (635) 23.00 (584)

3.9 (99) 3.3 (84) 3.8 (97) 3.0 (76)

2.7 (69) 2.4 (61) 2.8 (71)

2.3 (1.0) 2.5 (1.1) 2.7 (1.2) 2.8 (1.3) 2.9 (1.3)

15

540

35 (47) 35 (47) 35 (47) 35 (47) 40 (55)

15,000 (70) 15,000 (70) 15,000 (70) 15,000 (70) 15,000 (70)

7,500 (35) 7,500 (35) 7,500 (35) 7,500 (35) 7,500 (35)

10,000 (44.5) 10,000 (44.5) 10,000 (44.5) 10,000 (44.5) 10,000 (44.5)

4010280215

10

15

360

4010250215

10

15

360

4010350215

8

15

300

4010460215

10

4.4 (112)

3.0 (76)

15

300

RUS Accepted

2 SML — Specified Mechanical Load is the tension load that a Veri*Lite insulator can withstand during a 90-second test without failure. SML is comparable to the M&E strength rating of porcelain insulators. 3 RTL —A Routine Test Load value is equal to 50% of the SML value. 4 Proof Test — The mechanical tension load applied at the factory to each insulator for ten (10) seconds.

NOTE: PDI Type insulators are intended for applications which are within 75° of horizontal to allow proper shed drainage.

Page 1-4 | January 2019

PDI Electrical Characteristics

0.625" (16mm) Diameter Rod Deadend Insulators

Length

PDI/VLS

0.60

0.74

0.78

1.13

Electrical Characteristics

Critical Impulse Flashover

Leakage Distance Inches (mm)

Dry Arc Distance Inches (mm)

Power Arc kA cycles

SL of # of 4-1/4 Bells

Flashover ANSI - kV

RIV

Catalog Numbers

Insulator Class

Type

Dry-kV Wet-kV Pos-kV Neg-kV Test kV Max.

4010150215 PDI-15

16 (406) 26 (660) 31 (787) 33 (838) 37.6 (955)

8.1 (205) 12.6 (320) 14.3 (363) 20 (508) 19.1 (485)

100

80

150

170

15

<10

150

2

DS15

4010280215 PDI-28

140

120

235

250

20

<10

150

— DS28

4010250215 PDI-25

155

135

270

280

30

<10

150

3

DS35

4010350215 PDI-35

200

160

325

360

30

<10

150

4

4010460215 PDI-46

195

175

360

365

30

<10

150

— DS46

KEY TO THE CATALOG NUMBERS X01XXXX215

4 = ESP™ Rubber 8 = Silicone Rubber

SML

Example: Cat. #4013250215 is a Veri*Lite insulator, 25 kV. Rated with standard pin and rotated end-fitting (ferrous) 15,000 lbs. SML, plus standard markings.

Ferrous End-fitting 0 = Standard Marking 6 = CSA or Sample Testing

0 = Standard Pin 1 = Hex Pin 3 = Standard Pin

Type

Rotated End-fitting 5 = ANSI 52-3 Ball & Socket 6 = IEC 16mm Ball & Socket

Page 1-5 | January 2019

VLSMechanical Characteristics

0.625" (16mm) Diameter Rod Suspension Insulators

PDI/VLS

Length

SOCKET

BALL

D

Mechanical Characteristics

Standard Package Qty

D Diameter Inches (mm)

Net Wt. pounds (kg)

Catalog Numbers

No. of Sheds

Length Inches (mm)

1 SML pounds (kN)

2 RTL pounds (kN)

3 Proof pounds (kN)

Carton Pallet

4050021301

4

11.5 (292) 12.5 (318) 17.25 (438) 23 (584) 28.75 (730) 34.5 (876)

5.9 (150) 5.9 (150) 5.9 (150) 5.9 (150) 5.9 (150) 5.9 (150)

4 (1.8) 4 (1.8) 4 (1.8) 5 (2.3) 6 (2.8) 7 (3.2)

12

96

15,000 (70) 15,000 (70) 15,000 (70) 15,000 (70) 15,000 (70) 15,000 (70)

7,500 (35) 7,500 (35) 7,500 (35) 7,500 (35) 7,500 (35) 7,500 (35)

10,000 (44.5) 10,000 (44.5) 10,000 (44.5) 10,000 (44.5) 10,000 (44.5) 10,000 (44.5)

4050029001**

4

12

96

4050031301

6

12

96

4050041301

8

12

96

4050051301

10

12

48

4050061301

12

12

48

1 SML — Specified Mechanical Load is the tension load that a Veri*Lite insulator can withstand during a 90-second test without failure. SML is comparable to the M&E strength rating of porcelain insulators.

2 RTL —A Routine Test Load value is equal to 50% of the SML value.

3 Proof Test — The mechanical tension load applied at the factory to each insulator for ten (10) seconds.

Page 1-6 | January 2019

VLS Electrical Characteristics

0.625” (16mm) Diameter Rod Suspension Insulators

Length

PDI/VLS

TONGUE

CLEVIS

D

Electrical Characteristics

Critical Impulse Flashover

Leakage Distance Inches (mm)

Dry Arc Distance Inches (mm)

Power Arc kA cycles

Equivalent number of 5¾” X10” Bells

Flashover ANSI - kV

RIV

Catalog Numbers

Volt*/ Class

Type

Dry-kV Wet-kV Pos-kV Neg-kV Test kV Max. μV

4050021301 VLS-2

23 (584) 23 (584) 39 (991)

11.75 (298) 11.75 (298) 18 (457) 23.7 (602) 29.5 (749) 35.2 (894)

135

110

225

255

21

<10

150

2

15/25

4050029001** VLS-2

135

110

225

255

21

<10

150

2**

15/25

4050031301 VLS-3

190

140

320

330

32

<10

150

3

35/46

4050041301 VLS-4

54 (1372) 69 (1753) 84 (2134)

255

190

420

435

48

<10

150

4

46/69

4050051301 VLS-5

315

245

500

510

48

<10

150

5

69

4050061301 VLS-6

370

305

610

580

48

<10

150

6

69

* Phase-to-Phase voltage.

Suffix Code

Tower-end ANSI Y-Clevis

Line-end

** Replaces two 10” x 6-1/4” distribution deadend bells.

1201***

ANSI 52-3 Ball ANSI 52-3 Ball

*** Y-Clevis fitting only available on 405003 and above.

1301 1400 2A07

ANSI 52-3 Socket

VLS insulators are available with ANSI and IEC ball/socket end fittings and also with clevis/ tongue end fittings. Please use the following 4-digit suffix codes after the first 6-digits of the catalog number.

ANSI 52-6 Clevis ANSI 52-6 Tongue

IEC 16 mm Socket

IEC 16 mm Ball

Page 1-7 | January 2019

End Fitting Details (Inches)

PDI/VLS

PDI Tongue 

PDI Clevis PDI Clevis

.07

0.43

0.60

1.7

0.70 DIA

0.70 DIA

1.62

1.56

1.13

PDI Clevis PDI Ball ANSI 52-3 & IEC-16 mm 

PDI Socket ANSI 52-3 & IEC-16 mm  

0.68 ANSI (0.69 IEC)

1.27

2.56 0.80

1.27

Page 1-8 | January 2019

End Fitting Details (Inches)

VLS Ball ANSI 52-3 & IEC-16 mm

VLS Socket ANSI 52-3 & IEC-16 mm

PDI/VLS

0.68 ANSI (0.69 IEC)

2.50 0.80

1.27

1.27

VLS Clevis 

VLS Y-Clevis

0.88 DIA HOLE

0.75

45°

0.94

1.88

1.91

1.48

0.69 DIA HOLE

VLS Tongue 

0.55

0.69 DIA HOLE

1.54

Page 1-9 | January 2019

End Fitting Details (Inches)

PDI/VLS

Cotter Part No. 86166-4002

Clevis Pin Part No. 81257-4206

1.75

0.625

2.0

Hex Pin Part No. 89858-4206

1.75

0.63

2.0

Page 1-10 | January 2019

Notes

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

PDI/VLS

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

Page 1-11 | January 2019

About Hubbell Power Systems Hubbell Power Systems (HPS) manufactures a wide variety of transmission, distribution, substation, OEM and telecommunications products used by utilities. HPS products are also used in the civil construction, transportation, gas and water industries. Our product line includes construction and switching products, tools, insulators, arresters, pole line hardware, cable accessories, test equipment, transformer bushings and polymer precast enclosures and equipment pads.

Because Hubbell has a policy of continuous product improvement. We reserve the right to change design and specifications without notice.

© Copyright 2019 Hubbell Incorporated Printed in U.S.A. | Rev. 01/2019

Catalog CA_08_051_E

www.hubbellpowersystems.com

PDI/VLS

for 15-69kV Applications Veri*Lite™ LINE POST INSULATORS

Experience & Reliability

Page 1-13 | January 2019

CatalogNumber Key - Veri*Lite Line Post Insulators - Silicone

0 6 9

9

S

0

8

0

0

2

Polymer Type

Bottom End Fitting

00 = Gain Base-Transverse 09 = 3/4”Stud Base 10 = 7/8”Stud Base

80S =Veri*Lite SR Polymer

PDV /VLS VLLP

Hardware Finish

0 = Standard

Top End Fitting

0 = Teardrop Blade* 1 = Horizontal Clamptop 2 = Vertical Clamptop 5 = 5” B.C. Through

Rating

15 = 15kV (1.5” rod) 25 = 25kV (1.5” rod) 28 = 35kV (1.5” rod) 46 = 46kV (1.75” rod) 69 = 69kV (1.75” rod)

6 = Horizontal Clamptop (longer pintle bolt) A = Vertical Clamptop (longer pintle bolt) F = ‘F’ Neck H = Hotstick Operable Universal Clamp K = Universal Clamp B = Universal Clamp w/ Eyenut

*Teardrop Blade only available for 46-69kV

Dimensioning

0 =ANSI C29.18 Quality Conformance Tests 6 = Sample Tests 9 = Special

Horizontal Clamptop & Gain Base (0100)

Vertical Clamptop & Stud Base (0209 & 0210)

F-Neck & Stud Base (0F09 & 0F10)

Page 2-14 | January 2019

Silicone Rubber Line Post Insulators

Veri*Lite™ Silicone Rubber Line Post Insulators with Universal Clamp for 15- 69kV Applications

The Ohio Brass Universal Clamp end fitting is used with the Veri*Lite TM Line Post (VLLP) insulator family. Combining the proven direct bond silicone technology of the Ohio Brass VLLP design, the Universal Clamp offers a flexible range-taking connection that can be installed in either the vertical or horizontal direction. The Universal Clamp design eliminates the need for a separate additional conductor clamp; saving both money and installation time. In addition, the optional hotstick- operable feature provides flexibility for live-line work. Design Features • Proven direct bond interface • Weathersheds molded with proprietary silicone rubber compound • Universal clamp works for a conductor diameter range of 0.30” (7.6 mm) to 1.34” (34 mm) to provide flexibility in the field • Hot Stick option allows for live-line operability • Can be installed in vertical or horizontal directions, thus reducing inventory • Integral design eliminates need for additional trunnion clamp • Meets requirements of the latest edition of CSA 411.6 and ANSI C29.18

VLLP

Page 2-15 | January 2019

Line Post Mechanical and Electrical Characteristics

Dry Arc Distance Inches (mm)

ANSI C29.18 Class

“X” Dimen- sion Inches (mm)

Line & Ground End Shed Dia. Inches (mm)

Intermediate Shed Dia. Inches (mm)

Catalog Number

CEA LWI- WG-02 Class

Intermediate Shed Quantity

kV Post

Base

Style Line

Horz Horz Vert Vert Vert Horz Horz Vert Vert Vert Horz Horz Vert Vert Vert Horz Horz Horz Horz Vert Vert Vert Horz Horz Horz Horz Vert Vert Vert

Clamptop

Gain

80S015-0100

51-31 51-21 51-11 51-1F 51-32 51-22 51-12 51-2F 51-33 51-23 51-13 51-3F -- --

12.5 (318) 13.3 (339) 12.8 (324) 12.4 (315) 13.2 (334) 14.3 (362) 15.1 (383) 14.5 (368) 14.2 (360) 14.9 (379) 16.5 (420) 17.4 (441) 16.8 (425) 16.5 (418) 17.2 (438) 19.2 (488) 20.0 (508) 19.0 (482) 19.8 (504) 20.1 (510) 19.5 (495) 19.6 (498) 25.8 (656) 26.6 (676) 25.6 (650) 26.5 (672) 26.8 (680) 26.1 (663) 26.2 (667)

Clamptop 3/4 - 10 Tap 80S015-0109 Clamptop 3/4 - 10 Tap 80S015-0209 F-Neck 3/4 - 10 Tap 80S015-0F09 U-Clamp 3/4 - 10 Tap 80S015-0K09 Clamptop 3/4 - 10 Tap 80S025-0109 Clamptop 3/4 - 10 Tap 80S025-0209 F-Neck 3/4 - 10 Tap 80S025-0F09 U-Clamp 3/4 - 10 Tap 80S025-0K09 Clamptop 3/4 - 10 Tap 80S028-0109 Clamptop 3/4 - 10 Tap 80S028-0209 F-Neck 3/4 - 10 Tap 80S028-0F09 U-Clamp 3/4 - 10 Tap 80S028-0K09 Clamptop Gain 80S025-0100 Clamptop Gain 80S028-0100

15

LP-15

4.8 (121)

0

7.4 (188)

PDV /VLS VLLP

25

LP-25

5.2 (132)

2

3.8 (96)

9.6 (244)

35

LP-28M

5.1 (130)

4

4.6 (117)

11.7 (297)

-- -- --

Blade Blade

Gain

80S046-0000

3/4 - 10 Tap 80S046-0009

Clamptop

Gain

80S046-0100

51-34 51-24 51-14 51-4F

46

Clamptop 3/4 - 10 Tap 80S046-0109 Clamptop 3/4 - 10 Tap 80S046-0209 F-Neck 3/4 - 10 Tap 80S046-0F09 U-Clamp 3/4 - 10 Tap 80S046-0K09

LP-46

7.1 (179)

6

4.4 (112)

14.4 (390)

-- -- --

Blade Blade

Gain

80S069-0000

3/4 - 10 Tap 80S069-0009

Clamptop

Gain

80S069-0100

51-36 51-26 51-15

Clamptop 3/4 - 10 Tap 80S069-0109 Clamptop 3/4 - 10 Tap 80S069-0209 F-Neck 3/4 - 10 Tap 80S069-0F09 U-Clamp 3/4 - 10 Tap 80S069-0K09

69

LP-69M

7.5 (190)

8

5.2 (132)

22.3 (566)

-- --

NOTES: 1. Maximum Design Tension for Clamptop is 2500 pounds (11 kN) - See addendum #1

2. 15, 25 & 28 kV Units use 1.5 inch (38 mm) Diameter Rod 3. 46 & 69 kV Units use 1.75 inch (44 mm) Diameter Rod 4. Maximum Design Tension for Teardrop Blade is 5000 pounds (22 KN)

Page 2-16 | January 2019

Leakage Distance Inches (mm)

Impulse Critical Flashover Pos. kV

Impulse Positive Withstand kV

SCL pounds (kN)

MDCL/WCL pounds (kN)

Net Weight pounds (kg) Carton Pallet

Dry-kV Wet-kV

Max/Crate

kV

9.8 (4.5) 6.9 (3.1) 6.5 (2.9) 6.6 (3.0) 6.9 (3.1) 10.3 (4.7) 7.3 (3.3) 7.0 (3.2) 7.1 (3.2) 7.3 (3.3) 11.2 (5.1) 8.2 (3.7) 7.8 (3.5) 8.0 (3.6) 8.2 (3.7) 19.7 (8.9) 14.6 (6.6) 18.6 (8.4) 13.5 (6.1) 14.1 (6.4) 13.9 (6.3) 13.5 (6.1) 22.1 (10.0) 16.9 (7.7) 21.0 (9.5) 15.9 (7.2) 16.5 (7.5) 12.0 (5.4) 15.9 (7.2)

36 60 60 60 60 36 60 60 60 60 36 60 60 60 60

11.0 (279)

90

70

150

140

2800 (12.5)

1235 (5.5)

3

--

15

VLLP

17.3 (439)

110

75

185

170

2800 (12.5)

1235 (5.5)

3

--

25

26.1 (662)

135

100

215

200

2800 (12.5)

1235 (5.5)

3

--

35

14/21/28/35

70

14/21/28/35

34.3 (872)

170

125

260

235

2800 (12.5)

1235 (5.5)

--

--

70 70 70 70

46

14/21/28/35

35

14/21/28/35

35 35 35 35

58.2 (1478)

230

180

360

330

2470 (11.0)

1235 (5.5)

--

--

69

Universal Clamptop & Stud Base (0K09 & 0K10)

F-Neck & Stud Base (0F09 & 0F10)

Vertical Clamptop & Stud Base (0209 & 0210)

Page 2-17 | January 2019

Post Base Fittings Dimensions

PDI Clevis

B

0.82

A

E

10.0

3/4-10 UFS-2B THREAD 7/8-9 UFS-2B THREAD

PDV /VLS VLLP

C

D

1.25

0.82

15, 25 & 35 kV Stud Base

15, 25 & 35 kV Horizontal Gain Base

PDI Clevis

Post Line Fittings Dimensions (In Inches) 

B

A B

A

C

D

F

H

I

E

C

15-69 kV Horizontal Clamptop Cap

15-69 kV Vertical Clamptop Cap

Line Post Fittings Dimensions (in inches)

Type

A

B

C

D

E

F

H

I - -

Material 60-40-18 DI 60-40-18 DI 60-40-18 DI

Stud Base

4.06 4.00 4.00

2.25 4.75 5.38

4.40 0.62 1.12

1.38 0.38 0.38

0.50 0.69

3/4-10 UFS-2B 5/8-11 UFS-2B 5/8-11 UFS-2B

- -

H. Clamptop Cap V. Clamptop Cap

-

3.38

1.63

Page 2-18 | January 2019

PDI Tongue  Post Base Fittings Dimensions 

B

B

G

A

E

E

A CD

F

C

D

F

VLLP

H

46 & 69 kV Horizontal Gain Base

46 & 69 kV Stud Base

Post Line Fittings Dimensions (In Inches) 

F

A

I

G

B

4.0

2.29

C

R 1.00

H

2.42

D

R .1.0

2.875±.050

15-69 kV F-Neck Cap

46 & 69 kV Two Hole Blade

Line Post Fittings Dimensions (in inches)

Are you interested in learning more about Overhead Line Fittings supplier? Contact us today to secure an expert consultation!

Type

A

B

C

D

E

F

G

H

Material 60-40-18 DI 60-40-18 DI

H. Gain Base

14.50

7.00

12.00 10.00

6.75 0.50

1.25 x 0.88

0.88

4.00

Stud Base

4.22

2.875

5.50

1.50

3/4-10 UFS-2B or 7/8-9 UFS-2B

-

-

Two Hole Blade

2.75

1.38

0.50

4.00

0.75

1.00 Dia.

0.50 R

0.44 R

60-40-18 DI

Page 2-19 | January 2019

Application Curves for Veri*Lite Insulators

How to use the application curves. After you have established the loading cases, you can use the curves to determine whether a specific Veri*Lite unit meets your loading requirement. For example, consider the installation of a Veri*Lite post number 80S025-0100 on a line with a vertical cantilever load of 800 pounds and a compression load of 900 pounds. By entering the curve at these

values, find the allowable longitudinal load to be 900 pounds. When the posts are loaded in tension the cantilever loading due to the combined effects of longitudi- nal, vertical and tensile loads should not exceed the rated tension working value. IMPORTANT: The application curves should not be extrapolated.

80S015, 80S025 & 80S028 HORIZONTAL STYLE

1400

PDV /VLS VLLP

1200

1000

800

0 Longitudinal 300 Longitudinal 600 Longitudinal 900 Longitudinal 1200 Longitudinal

600

VERTICAL LOAD, LBF

400

200

0

-3000

-2000

-1000

0

1000

2000

3000

LINE POST APPLICATION CURVES 9-12-05

Tension

Compression

TRANSVERSE LOAD, LBF

80S015, 80S025 & 80S028 VERTICAL STYLE

1400

1200

1000

0 Longitudinal 300 Longitudinal 600 Longitudinal 900 Longitudinal 1200 Longitudinal

800

600

TRANSVERSE LOAD, LBF

400

200

0

-3000

-2000

2000

3000

-1000

0

1000

LINE POST APPLICATION CURVES 9-12-05

Compression

Tension

VERTICAL LOAD, LBF

Maximum deflection for any of the post styles is approximately 1.75" at SCL. Curves are shown using a 2.0 safety margin to SCL

Page 2-20 | January 2019

Application Curves for Veri*Lite Insulators

How to use the application curves. After you have established the loading cases, you can use the curves to determine whether a specific Veri*Lite unit meets your loading requirement. For example, consider the installation of a Veri*Lite post number 80S025-0100 on a line with a vertical cantilever load of 800 pounds and a compression load of 900 pounds. By entering the curve at these

values, find the allowable longitudinal load to be 900 pounds. When the posts are loaded in tension the cantilever loading due to the combined effects of longitudi- nal, vertical and tensile loads should not exceed the rated tension working value. IMPORTANT: The application curves should not be extrapolated.

80S046 & 80S069 HORIZONTAL STYLE

1400

VLLP

1200

1000

800

0 Longitudinal 300 Longitudinal 600 Longitudinal 900 Longitudinal 1200 Longitudinal

600

VERTICAL LOAD, LBF

400

200

0

-3000

-2000

-1000

0

1000

2000

3000

LINE POST APPLICATION CURVES 9-12-05

Compression

Tension

TRANSVERSE LOAD, LBF

80S046 & 80S069 VERTICAL STYLE

1400

1200

1000

0 Longitudinal 300 Longitudinal 600 Longitudinal 900 Longitudinal 1200 Longitudinal

800

600

400

TRANSVERSE LOAD, LBF

200

LINE POST APPLICATION CURVES 9-12-05

0

-3000

-2000

-1000

1000

2000

3000

Compression

Tension

VERTICAL LOAD, LBF

Maximum deflection for any of the post styles is approximately 1.75" at SCL. Curves are shown using a 2.0 safety margin to SCL

Page 2-21 | January 2019

Line Post Insulator Studs

DF19M Series Serrated collar and lockwasher secure unit to line post insulator and prevent accidental disassembly. Cut threads above serrated collar, rolled threads below collar.

For Steel Crossarms

For Steel Crossarms

Dimensions (in.)

PDV /VLS VLLP

Hardware Included

Standard Package

Weight 100 Pcs.

Catalog No.

A

B

C

D

(1) reg. hexnut and (2) spring lockwashers (1) reg. hexnut and (2) spring lockwashers (1) reg. hexnut and (2) spring lockwashers

DF19M1

1-1/8 1-3/4

5/8

3/4

100 pcs.

43 lbs.

DF19M3

1-1/8 1-3/4

3/4

3/4

100 pcs.

54 lbs.

875833001 1-3/8

2

7/8

7/8

100 pcs.

85 lbs.

DF19M3

For Wood Crossarms

Dimensions (in.)

Standard Package

Weight 100 Pcs.

Catalog No.

Hardware Included

A B C

D

(1) sq. nut, (1) sq. washer (1) spring lockwasher, (1) MF locknut (1) sq. nut, (1) sq. washer (1) spring lockwasher, (1) MF locknut (1) sq. nut, (1) sq. washer (1) spring lockwasher, (1) MF locknut (1) sq. nut, (1) sq. washer (1) spring lockwasher, (1) MF locknut (1) sq. nut, (1) sq. washer (1) spring lockwasher, (1) MF locknut (1) sq. nut, (1) sq. washer (1) spring lockwasher, (1) MF locknut (1) sq. nut, (1) sq. washer (1) spring lockwasher, (1) MF locknut

DF19M2 1-1/8 7 5/8 3/4

50 pcs.

102 lbs.

DF19M4 1-1/8 7 3/4 3/4

40 pcs.

140 lbs.

DF19M19 1-1/8 10 5/8 3/4

25 pcs.

176 lbs.

DF19M20 1-1/8 12 5/8 3/4

25 pcs.

192 lbs.

*DF19M29 1-1/8 14 3/4 3/4

20 pcs.

234 lbs.

*DF19M32 1-1/8 24 3/4 3/4

15 pcs.

342 lbs.

875843001 1-3/8 8 7/8 3/4

50 pcs.

277 lbs.

DF19M2

*DF19M29 and DF19M32 include (1) additional double coil lockwasher.

Page 2-22 | January 2019

Suspension Trunnion Bolted AluminumClamptop Clamps

For standard voltage applications with all aluminum, ACSR or aluminum alloy conductor.

Designed for use on tangent suspension spans with horizontal or vertical post insulators.

Keeper is reversible for proper fit on different size conductors.

Material: Body and Keeper—356-T6 aluminum alloy Hardware—Galvanized steel Anti-static spring 302 stainless steel

VLLP

Ultimate Body Strength lbs. (kN)

Dimension Inches (mm)

Former Catalog Number

Clamping Range Inches (mm)

Approx Wt. Each lbs. (kg)

Catalog Number

Fig. No.

L

W

J

0.25-0.57 (6.3-14.4) 0.35-0.86 (8.8-21.8)

2,800 (12.46) 2,800 (12.46) 2,800 (12.46) 2,800 (12.46) 2,800 (12.46)

5-1/4 (133.3) 5-1/4 (133.3) 5-1/4 (133.3) 5-1/4 (133.3) 5-1/4 (133.3)

3-7/8 (98.4) 3-7/8 (98.4) 3-7/8 (98.4) 3-7/8 (98.4) 3-7/8 (98.4)

1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7)

TSC57

270660-3002

1

0.42 (0.19)

TSC86

-

1

0.45 (0.20)

0.50-1.06 (12.7 - 26.9) 1.00-1.50 (25.4-38.1) 1.50-2.00 (38.1-50.8)

TSC106

270661-3002

1

0.62 (0.28)

TSC150

270662-3002

1

0.64 (0.29)

TSC200

270663-3002

2

0.75 (0.34)

NOTES: 1.

Recommended torque on bolts; 1/2”—480 in. lbs.

2. Anti-static spring can be supplied by adding “ARIV” to catalog number. Example, TSC57ARIV. 3. Clamptop clamps can be mounted directly on Veri*Lite posts, if the posts are ordered with the horizontal or vertical clamptop option.

Page 2-23 | January 2019

Pole Top Insulator Bracket

C

D

PDV /VLS VLLP

A

E

IB2

C

Typical Side View

D

A

B

IB3, IB4, IB5, IB6

Mounts post or pin type insulator to top of pole. Variety of bolt hole locations for mounting to pole.

Minimum Ultimate BendingMoment at Base

Accepts Insulator Stud Dia.

Accepts Mounting Bolt Dia.

Catalog Number

Dim. A

Dim. B

Dim. C

Dim. D

Dim. E

Top Plate (width x depth)

Approx. Ship Wt. Each

IB2

20,000 in-lbs 30,000 in-lbs 40,000 in-lbs 50,000 in-lbs 60,000 in-lbs

5" 8" 8" 8" 8"

N/A

10 3/4"

1"

4.2 lbs. 6.2 lbs. 7.0 lbs 9.8 lbs. 11.9 lbs.

5/8"

3 3/4" Sq.

IB3*

5 1/4" 5 1/4" 5 1/2" 5 3/4"

13"

1 1/2"

5"

IB4 IB5 IB6

5/8" or 3/4"

13 3/4"

1"

4" x 3 3/4"

5/8" or 3/4"

14" 15"

1 1/4" 1 1/2"

4" Sq.

6"

4 1/2" Sq.

* RUS Listed, eb - Bracket, pole top

Page 2-24 | January 2019

Pole Top Insulator Bracket

Angle Crossarm Bracket

Mounts post insulators at 30° angle on crossarm for use on running corners.

Approx. Ship Wt. Lbs per 100 pcs.

Mtg. Bolt Diameter

Stud Bolt Diameter

Catalog No.

Crossarm Size

3-3/4”x 4-3/4”Max. and Round Crossarms

1XAB

3/4”

3/4”

610

Ductile iron per ASTM A-536 Hot dipped galvanized per ASTM A-153

VLLP

Post Insulator Curved Base Bracket

3 1 /

" R

2

This bracket can be used for mounting distribution post-type insulators from 15 kV to 34.5 kV on the side of the pole. The base has a pole- shape back for convenient installation. Brackets can be placed in a phase-over-phase arrangement or can be mounted on opposite sides of the pole for “armless” construction.

W

11 /

" Dia. hole L 3 / 8 "

16

X

Insulators not included.

A

Dimension (in)

Approx. Ship Wt. Lbs per 100 pcs.

Angle A

Catalog No.

4 1 /

"

L D W *C2060009 9-1/2 13/16 4

2

10"

D

15° 15° 15°

1220 1669 2066

†*C2060010

12 13/16 4 15 13/16 4

load table

C2060011

11 /

" x 1 1 /

" slot

16

4

*These brackets have 13/16" stringing block holes. †RUS listed

C2060009

Page 2-25 | January 2019

Pole Top Insulator Bracket

Post Insulator Side Mounted Brackets

5 1 /

"

8 3 /

"

4

4

The bracket is formed from high-quality 3/8” x 2-1/2” bar steel and hot dip galvanized. It can be utilized to mount distribution post insulators from 15 kV to 34.5 kV.

11 /

" x 1 3 /

" slot

11 /

" x 1 3 /

"

16

8

16

8

slot

13 /

" hole 30°

16

30°

Pole Mounting Bolts Required

Catalog No.

Insulator Stud Bolts Required

Approx. Ship Wt. Lbs per 100 pcs.

13 /

" hole

13 /

16 " hole

4 1 /

"

16

PDV /VLS VLLP

8 1 /

"

8 1 /

"

2

2

2

13/16” Hole

11/16” Hole

13 /

" x 15 /

" slot

†*C2060209

16919

Two 5/8” Two 5/8”

3/4” 3/4”

650 440

11 /

" hole

16

16

16

11 /

" hole

C2060162

-

16

*This bracket is designed to facilitate a stringing block. †RUS listed

C2060162       C2060209

Post Insulator Uni-Brackets

Chance Uni-Brackets are a clean-appearing, low-cost method of mounting three post-type insulators atop a pole completely eliminating the crossarm. The brackets can be installed on the pole in less than five minutes, requiring only two 3/4” bolts for attachment. Uni-Brackets fit poles  having a pole-top diameter from 6” to 8-1/2”.   Slot on top is 11/16” x 2-1/4”. No. 9183 brackets can be adapted to a variety of distribution construction using post-type insulators from 15kV through 34.5 kV.

18 17 /

"

8 1 /

"

32

" Holes 13 / 16

" Hole

4

11 /

60° 9 1 / 2

"

16

13 /

" x 1 1 /

"

3 /

" x 2 1 /

"

16

4

8

2

Hole

Stock

Insulator Stud Bolts Required

Approx. Ship Wt. Lbs per 100 pcs.

Catalog No.

†9183

5/8”

2100

No. 9183

†Includes both sections of bracket

Page 2-26 | January 2019

Notes

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

VLLP

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________

Page 2-27 | January 2019

About Hubbell Power Systems Hubbell Power Systems (HPS) manufactures a wide variety of transmission, distribution, substation, OEM and telecommunications products used by utilities. HPS products are also used in the civil construction, transportation, gas and water industries. Our product line includes construction and switching products, tools, insulators, arresters, pole line hardware, cable accessories, test equipment, transformer bushings and polymer precast enclosures and equipment pads.

Because Hubbell has a policy of continuous product improvement. We reserve the right to change design and specifications without notice.

© Copyright 2019 Hubbell Incorporated Printed in U.S.A. | Rev. 01/2019

Catalog CA_08_051_E

www.hubbellpowersystems.com

PDI/VLS

QUADRI*SIL® Insulators for 69 kV Applications & Above Silicone Rubber Direct Bond

Page 1-29 | January 2019

CatalogNumber Key

The Quadri*Sil® Insulators Numbering Scheme is organized according to a smart numbering system. Each group of digits de- fines a characteristic of the product you are ordering. To fill out this form, start on “a: Insulator Type.” Then, fill in your selection in the box corresponding to the letter “a.” Apply the same rule for all the other sections.

a

d

WEATHERSHED PROFILE

INSULATOR TYPE P - POST | S - SUSPENSION

a) Insulator type . Defines your insulator type: Post or Suspension. Select “P” or “S” for Post or Suspension, respectively, and fill in your selection in the box designated for “a.” In this example, we selected a suspension insulator.

Suspension S = Standard Leakage Distance (2.5) H = High Leakage Distance (2.9 or 3.3) E = Extra High Leakage Distance (4.2)

S

Post S = Standard Leakage Distance E = Extra High Leakage Distance

a b b b c c c d e f

f

g

b

MECHANICAL STRENGTH

QUADRI*SIL ®

d) Weathershed Profile . Defines the leakage distance design. For a suspension insulator with standard leakage distance, use “S.” For a suspension insulator with high leakage distance, use “H.” For a line post, only the standard leakage distance design is available. Fill in your selection in the box designated for “d.” For example, if you want an insulator with high leakage distance, you would place an “H” in the box designated “d.”

Suspension (SML), Rod Diameter 025 = 25kip (111kN), 5/8" (16mm) 030 = 30kip (133kN), 5/8" (16mm) 050 = 50kip (222kN), 7/8" (22mm) 080 = 80kip (355kN), 1 1/4" (32mm)

120 = 120kN, 5/8" (16mm) 133 = 133kN, 7/8" (22mm) 160 = 160kN, 7/8" (22mm) 210 = 210kN, 7/8" (22mm) Post, Rod Diameter

S

0

2

5

0

4

9

H

a b b b c c c d e f

f

g

e

TOP FITTING

250 = Series 250, 2.5" (63.5 mm) 300 = Series 300, 3.0" (76.2 mm) 350 = Series 350, 3.5" (88.9 mm)

Suspension Insulators 0 = Chain Eye 1 = ANSI Ball 2 = Y-Clevis 3 = ANSI Socket 4 = ANSI Straight Clevis 7 = IEC Ball Fitting 16 mm for 120 kN

Line Post Insulators 0 = Tear Drop Blade 1 = Horizontal Clamptop 2 = Vertical Clamptop 3 = 5” (127 mm) Bolt Circle

b) Strength . Defines the mechanical strength of your insulator. Fill in your selection in the boxes designated for “b.” Note : kip = Kilopound, kN = Kilonewton For example, if you want a Suspension insulator with 25 kip, this is what your form would look like so far:

5/8” (16 mm) Tapped Hole

5 = 5” (127 mm) Bolt Circle

5/8” (16 mm) Through Hole

20 mm for 160 kN and 210 kN

9 = Long Tear Drop Blade

S

0

2

5

8 = IEC Straight Clevis A = IEC Socket 16 mm for 120 kN

a b b b c c c d e f

f

g

c

POLYMER LENGTH

20 mm for 160 kN and 210 kN

e) Top Fitting . Defines the top end fitting of your insulator. Fill in your selection in the box designated for “e.” For example, if you want a suspension insulator with a Y-clevis top end fitting, you would place a “2” in the box designated for “e.”

3 digits for distance between metal parts, in inches c) Polymer length . Defines the polymer length of the insulator (please use catalog tables for possible polymer lengths). Fill in your selection in the boxes designated for section “c.” For example, if you want a 49-inch polymer length, enter:

S

0

2

5

0

4

9

H 2

a b b b c c c d e f

f

g

S

0

2

5

0

4

9

a b b b c c c d e f

f

g

Page 3-30 | January 2019

f

example

BOTTOM FITTING

Suspension Insulators 00 = Chain Eye 01 = ANSI Ball 02 = Y-Clevis 03 = ANSI Socket 04 = ANSI Straight Clevis 07 = IEC Ball Fitting 16 mm for 120 kN 08 = IEC Straight Clevis 0A = IEC Socket 16 mm for 120 kN

Line Post Insulators (250 Series Only)* 02 = Aluminum Gain 12” (305 mm) CL 1 mounting 03 = Aluminum Flat 8”x 10” (203 mm x 254 mm), 15/16” (24 mm) hole diameter 04 = Aluminum Flat 8”x 13” (203 mm x 330 mm), 15/16” (24 mm) hole diameter 05 = 5” (127 mm) Bolt Circle, 5/8” (16 mm) tapped hole 07 = Steel Gain 12” (305 mm) CL mounting, 15/16” (24 mm) hole diameter 08 = Steel Flat 8”x 13” (203 mm x 330 mm) MS 2 , 15/16” (24 mm) hole diameter 15 = 5” (127 mm) Bolt Circle, 5/8” (16 mm) through hole

Suspension Insulator, 25 kip, 49” of Polymer Length, Standard Leakage Distance Profile (2.5), Top Fitting: Y-Clevis, Bottom Fitting: ANSI Ball, No Corona Ring S025049S2010

20 mm for 160 kN and 210 kN

20 mm for 160 kN and 210 kN

*For 300 & 350 Series refer to appropriate catalog section.

1 CenterLine 2 HorizontalxVertical MountingPatternSpacing

QUADRI*SIL ®

f) Bottom Fitting . Defines the bottom end fitting of your insulator. Fill in your selection in the boxes designated for “f.” For example, if you want an ANSI ball bottom end fitting, you would place “01” in the boxes designated for “f.”

S 0

2

5

0

4

9 H 2 0 1

a b b b c c c d e f

f

g

g

RINGS

Line Post Insulator, 2.5” (63.5 mm) Rod Diameter, 21.9” Polymer Length, Standard Leakage Distance, Top Fitting: Tear Drop Blade, Bottom Fitting: 2-Piece Aluminum Gain Base, No Corona Ring P250021S0020

0 = No Ring Required A = ≥220 kV, 8” (203 mm) ring for suspension, 12” (305 mm) ring for series 250 post, 15" (381 mm) ring for series 300 & 350 post. B = ≥330 kV, 12” (305 mm) ring for suspension, 15” (381 mm) ring for series 250 post C = ≥400 kV, 12” (305 mm) line end and 8 (203 mm) ground end ring for suspension D = ≥500 kV, 15” (381 mm) line end and 8” (203 mm) ground end ring for suspension E = ≥735 kV, 15” (381 mm) line end and 12” (305 mm) ground end ring for suspension

g) Rings . Defines your need for a Corona Ring. Fill in your selection in the box designated for “g.” The example below shows a selection of a corona ring for 220 kV, 8” (203 mm) for a suspension insulator. Thus, “A” was placed in the box designated for “g.”

S 0

2

5

0

4

9 H 2 0 1 A

a b b b c c c d e f

f

g

Your complete part number will be S025049H201A

Your final catalog number should look like this Fill out boxes according to instructions

a b b b c

c

c

d e

f

f

g

Page 3-31 | January 2019

Section Length High Leak Design

Suspension Insulators Mechanical Ratings SML = 25 kip/120 kN RTL = 12.5 kip/60 kN Rod Diameter: 5/8" (16 mm)

Standard Design

ANSIValues

IECValues

Nominal Polymer Length inches

Section Length inches (mm)

Strike Distance inches (mm)

Leakage Distance inches (mm) 55 (1397) 64 (1626) 60 (1524) 71 (1803) 77 (1956) 90 (2286) 93 (2362) 110 (2794) 110 (2794) 129 (3277) 121 (3073) 142 (3607) 132 (3353) 155 (3937) 143 (3632) 168 (4267) 154 (3912) 181 (4597) 165 (4191) 194 (4928) 176 (4470) 207 (5258) 187 (4750) 220 (5588) 198 (5029) 233 (5918) 209 (5309) 246 (6248) 220 (5588) 259 (6579) 231 (5867) 272 (6909) 242 (6147) 285 (7239) 253 (6426) 298 (7569) 264 (6706) 310 (7874) 275 (6985) 323 (8204) 286 (7264) 336 (8534) 297 (7544) 349 (8865) 308 (7823) 362 (9195) 319 (8103) 375 (9525) 330 (8382) 388 (9855) 341 (8661) 401 (10185) 352 (8941) 414 (10516) 363 (9220) 427 (10846)

60-Hz 1-minute Wet Withstand (kV)

SelectionGuide: TypicalLineVoltage,kV

60-Hz Dry Flashover (kV)

60-Hz Wet Flashover (kV)

Critical Impulse Positive (kV)

Critical Impulse Negative (kV)

Impulse Positive Withstand (kV)

Impulse Negative Withstand (kV)

CatalogNumbers ANSI / IEC

69 110 132 161 220 330 400

S025021S2010 /S120021S2010 S025021H2010 /S120021H2010 S025023S2010 /S120023S2010 S025023H2010 /S120023H2010 S025030S2010 /S120030S2010 S025030H2010 /S120030H2010 S025036S2010 /S120036S2010 S025036H2010 /S120036H2010 S025043S2010 /S120043S2010 S025043H2010 /S120043H2010 S025047S2010 /S120047S2010 S025047H2010 /S120047H2010 S025051S2010 /S120051S2010 S025051H2010 /S120051H2010 S025056S2010 /S120056S2010 S025056H2010 /S120056H2010 S025060S2010 /S120060S2010 S025060H2010 /S120060H2010 S025064S2010 /S120064S2010 S025064H2010 /S120064H2010 S025069S2010 /S120069S2010 S025069H2010 /S120069H2010 S025073S2010 /S120073S2010 S025073H2010 /S120073H2010 S025077S2010 /S120077S2010 S025077H2010 /S120077H2010 S025081S2010 /S120081S2010 S025081H2010 /S120081H2010 S025086S2010 /S120086S2010 S025086H2010 /S120086H2010 S025090S2010 /S120090S2010 S025090H2010 /S120090H2010 S025094S2010 /S120094S2010 S025094H2010 /S120094H2010 S025099S2010 /S120099S2010 S025099H2010 /S120099H2010 S025103S2010 /S120103S2010 S025103H2010 /S120103H2010 S025107S2010 /S120107S2010 S025107H2010 /S120107H2010 S025112S2010 /S120112S2010 S025112H2010 /S120112H2010 S025116S2010 /S120116S2010 S025116H2010 /S120116H2010 S025120S2010 /S120120S2010 S025120H2010 /S120120H2010 S025125S2010 /S120125S2010 S025125H2010 /S120125H2010 S025129S2010 /S120129S2010 S025129H2010 /S120129H2010 S025133S2010 /S120133S2010 S025133H2010 /S120133H2010 S025138S2010 /S120138S2010 S025138H2010 /S120138H2010 S025142S2010 /S120142S2010 S025142H2010 /S120142H2010

021 021 023 023 030 030 036 036 043 043 047 047 051 051 056 056 060 060 064 064 069 069 073 073 077 077 081 081 086 086 090 090 094 094 099 099 103 103 107 107 112 112 116 116 120 120 125 125 129 129 133 133 138 138 142 142

33.3 (846) 33.3 (846) 35.4 (899) 35.4 (899) 41.9 (1064) 41.9 (1064) 48.4 (1229) 48.4 (1229) 54.9 (1394) 54.9 (1394) 59.2 (1504) 59.2 (1504) 63.5 (1613) 63.5 (1613) 67.8 (1722) 67.8 (1722) 72.1 (1831) 72.1 (1831) 76.5 (1943) 76.5 (1943) 80.8 (2052) 80.8 (2052) 85.1 (2162) 85.1 (2162) 89.4 (2271) 89.4 (2271) 93.7 (2380) 93.7 (2380) 98.1 (2492) 98.1 (2492) 102.4 (2601) 102.4 (2601) 106.7 (2710) 106.7 (2710) 111 (2819) 111 (2819) 115.3 (2929) 115.3 (2929) 119.7 (3040) 119.7 (3040) 124 (3150) 124 (3150) 128.3 (3259) 128.3 (3259) 132.6 (3368) 132.6 (3368) 136.9 (3477) 136.9 (3477) 141.3 (3589) 141.3 (3589) 145.6 (3698) 145.6 (3698) 149.9 (3807) 149.9 (3807) 154.2 (3917) 154.2 (3917)

21.5 (546)

220 220 250 250 315 320 385 390 460 465 500 510 540 540 585 585 625 625 660 665 695 700 735 740 780 780 815 820 860 860 890 895 925 930 960 965 990 995

210 210 235 235 305 305 365 370 435 440 475 475 510 510 545 550 580 585 615 615 650 650 685 690 720 720 745 750 780 795 815 820 850 855 875 880 890 895 920 920 945 950 975 980

370 370 415 415 525 535 635 645 730 740 800 805 865 875 935 940

350 350 395 395 510 515 620 620 725 730 795 800 865 870 935 940

145 150 165 165 210 210 255 260 300 305 330 330 360 360 385 390 410 415 435 440 465 465 490 495 515 515 540 540 560 565 585 585 610 615 630 635 655 660 675 675 695 700 720 720 735 740 760 760 780 780 795 800 815 820 835 835

315 325 350 355 445 450 540 540 630 635 690 695 750 760 810 815 870 880 930 940 990 995

300 305 330 335 430 435 525 535 625 630 685 690 750 755 810 815 875 880 940 945 995

22 (559)

23.7 (602) 24.1 (612) 30.2 (767) 30.6 (777) 36.6 (930) 37.1 (942) 43.1 (1095) 43.6 (1107) 47.4 (1204) 47.9 (1217) 51.8 (1316) 52.2 (1326) 56.1 (1425) 56.5 (1435) 60.4 (1534) 60.9 (1547) 64.7 (1643) 65.2 (1656) 69 (1753) 69.5 (1765) 73.4 (1864) 73.8 (1875) 77.7 (1974) 78.1 (1984) 82 (2083) 82.5 (2096) 86.3 (2192) 86.8 (2205) 90.6 (2301) 91.1 (2314) 95 (2413) 95.4 (2423) 99.3 (2522) 99.7 (2532) 103.6 (2631) 104.1 (2644) 107.9 (2741) 108.4 (2753) 112.2 (2850) 112.7 (2863) 116.6 (2962) 117 (2972) 120.9 (3071) 121.3 (3081) 125.2 (3180) 125.7 (3193) 129.5 (3289) 130 (3302) 133.8 (3399) 134.3 (3411) 138.2 (3510) 138.6 (3520) 142.5 (3620) 142.9 (3630)

QUADRI*SIL ®

1000 1010 1065 1070 1130 1135 1200 1205 1260 1270 1325 1330 1400 1410 1460 1470 1520 1540 1575 1585 1640 1645 1690 1695 1750 1755 1815 1820 1875 1880 1935 1940 1990 1995 2050 2055 2110 2115 2165 2170

1005 1010 1075 1075 1140 1145 1210 1215 1275 1280 1345 1345 1420 1420 1485 1495 1545 1560 1600 1610 1670 1670 1725 1730 1790 1795 1850 1855 1915 1920 1975 1980 2040 2045 2100 2105 2160 2165 2220 2225

1005 1060 1065 1120 1125 1180 1185 1240 1245 1300 1305 1355 1365 1415 1425 1475 1485 1530 1535 1590 1595 1645 1655 1705 1710 1755 1765 1815 1820 1870 1875 1925 1930 1980 1980

1050 1055 1105 1115 1165 1170 1220 1225 1275 1285 1335 1340 1395 1395 1445 1450 1500 1510 1555 1565 1615 1620 1665 1670 1720 1725 1770 1780 1825 1830 1880 1885 1930 1935

1010 1015 1040 1045 1070 1075 1100 1105 1125 1130 1155 1160 1180 1185 1205 1210 1230 1235

1000 1005 1030 1035 1055 1060 1080 1085 1105 1110 1130 1135

Notes: Dimensional and electrical values displayed in main table are for an insulator with Y-clevis and Ball end fittings. For voltages above 400 kV, other section lengths, or end fitting combinations, please contact your HPS representative. Electrical values are without corona ring. For voltages equal to or greater than 220 kV, refer to the dedicated page within this section for corona rings and associated physical/electrical changes to the above data.

Section Length Adjustment Table, Base End Fittings: Y-clevis-Ball (201)

Bottom Fitting

Top and Bottom End Fitting Digits (“e” & “f”) in Catalog Number

Length Change inches (mm)

Top Fitting

Y-Clevis

Eye

200 001 000 301 A07 400

1.62 (41) 0.02 (0) 1.64 (42)

Eye Eye

ANSI 52-5 Ball

Eye

ANSI 52-5 Socket IEC 16 mm Socket ANSI 52-6 Clevis

ANSI 52-5 Ball IEC 16 mm Ball

-1.15 (-29) -0.03 (-1)

Eye

0.82 (21)

To determine the section length for an insulator with a different end fitting combination, please add or subtract the displayed length change in the table above. For configurations not shown, use the Catalog Number Key or contact your HPS representative.

Page 3-32 | January 2019

Want more information on cable piercing clamp? Feel free to contact us.