Our underground lights have an IP68 rating and are suitable for dressing up patios and even swimming pools. With the help of controller or mobile APP, you can easily achieve rich lighting effects.
In-ground lighting can be defined as lighting that is done in the ground. It is also referred to as in-floor lighting especially when it refers to similar lighting done indoors. LED in-ground lights are such lights with the difference being they use LED technology instead of standard lighting technology.
The installation of floor recessed and ground lights aims to create guide lights which highlight the paths in outdoor building and garden areas. They also make the most of architectures and greenery defining private and public spaces, reducing the size of illumination products whose light is only visible because their technical components disappear below the surface.
Not all in-ground lights are designed to use the best lamps. LED in-ground lights are therefore the best types of these lighting fixtures as they are able to produce the best light for use of the space with regards to tone and color rendering. They also have optimum light efficiency that guarantees a substantial reduction in energy consumption. The introduction of LED technology to in-ground lighting is in response to the need to combine energy efficiency and light quality. To guarantee top performance in terms of energy efficiency, unaltered color and lifetime, LEDs are selected from the best in the world.
Reflectors, optics and lenses that produce a wide range of lighting effects is a must have if each LED in-ground light is to provide appropriate lighting. The range of effects provided by such effects should start from wall washer effects for evenly lighting vertical display surfaces and walls, to focused beams of light for lighting details or small objects. The choice of technical solutions and materials to allow LED in-ground lights to be fitted outdoors aims to optimize resistance to vandalism and weather. Particular attention has to be paid to avoid water penetrating the casings of such lighting fixtures even in very bad weather such as ice, heavy snow and rain.
bitaso are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Up-lights are one of the types of LED in-ground lights. They provide ground level illumination by having their lights pointed up from the ground. The intent of such lights is to highlight points in the landscape such as architectural features and cherished plants. In-ground fixtures will vary depending on the design and the item they are to highlight. For instance, a small plant may require a couple of in-ground lights using 10W power rating. On the other hand, a group of plants or a stature may require several lights using 20W to 40W power rating.
Path lights are another most dramatic and common uses of in-ground lighting. The whole point of this type of lighting is to create a guide on either side of a driveway, walkway or path. It has two main uses; for safety purposes by keeping visitors from wandering of the lighted area, and for decorative purposes. Unlike other types of outdoor lighting, in-ground LED lights should be placed fairly low. They normally use lamps that spread the light with a gentle glowing effect.
Too many in-ground path lights should not be used in a single area as they will create an airline runway look. Understatement should be the operation consideration when the lights are being placed. The normal power rating for LEDs of these lights is lower than those of up-lights. Power ratings of anything between 10W to 20W should suffice. Low power ratings for up-lights and path lights are required so as to get the desired effect.
User-defined in-ground lights are another type of LED in-ground lights. These do not have specific technical details as the user who orders them is required to give a description of what they would want them to do. The reason why most companies who manufacture in-ground lights give this option is to allow their consumers to have various options.
Some customers, especially those who are in the construction industry, may need to have their in-ground lights created to a specific design and style. When this is the case, they will have to consult with various manufacturing companies to see the one that can meet their needs. The rise in demand of user specified in-ground LED lights has made many companies to offer this option. It allows a client to choose the design of the LED light, its shape, power consumption and color.
Please contact us for our product catalogue, technical data, and prices.
If you want to learn more, please visit our website Underground LED Light Manufacturer.