All PCB surface finishes have strengths and weaknesses. We're here to help you choose the best PCB materials for your project needs. Use the matrix below to assess the pros and cons of each material, to find the best fit for your circuit board and PCB finish needs.
The company is the world’s best pcb surface finish comparison supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Please review the information below for a side-by-side comparison of PCB surface finishes.
A printed circuit board (PCB) surface finish has two main functions: To prevent the copper from oxidizing and to provide a solderable surface.
Some PCB surface finishes, however, are more popular and versatile than others. As you review your options, you’ll likely consider durability, cost, and the materials used within the finish, such as tin-lead, lead-free, various gold finishes, and silver. Additionally, you may have concerns about the finish compatibility with the subsequent termination process – such as wire bonding or welding. But how do you know which surface finish is best for your next PCB project?
We’ve compiled a comprehensive list of the nine different surface finishes. In this article, we’ll explain the purpose and common uses of each surface — plus the advantages and disadvantages — so you can find the best option for your next project.
The 9 Different PCB Finishes
How to Choose the Best PCB Finish for Your Project
ENIG is the most popular option and is used on about 80% of all PWBs. This finish provides a thin, gold, solderable layer that protects the copper traces with a nickel barrier between it and the copper. ENIG is a good lead-free option that results in a durable, long-lasting finish.
Advantages:
With HASL, the printed circuit board is held vertically by clamps and dipped into a flux bath and then a molten solder hot vat. The finish, which contains tin/lead, is leveled off with hot air knives and the printed circuit board panel is raised out of the molten solder vat. This ensures a homogenous thickness over the entire board. It was once one of the most popular finishes but is now mainly used only on military and aerospace applications.
Advantages:
Disadvantages:
The properties and uses of this finish are the same as HASL — except there is virtually no lead in the alloy. Instead, the alloy is a tin and copper, tin and nickel, or tin, copper, nickel and germanium alloy. This finish is not widely used.
Advantages:
Disadvantages:
With this finish, a layer of tin is deposited onto the copper surface using a chemical process. This is frequently used in high-speed circuits. Immersion tin works well to protect underlying copper from oxidization, but copper and tin in such close proximity can create diffusion from one metal into the other, resulting in challenges.
Advantages:
Disadvantages:
Contact us to discuss your requirements of immersion tin pcb . Our experienced sales team can help you identify the options that best suit your needs.
A thin layer of material is applied over the copper to protect it prior to soldering. Though this water-based organic surface finish was once very popular, it is not widely used today.
Advantages:
Disadvantages:
Hard gold is plated over the nickel, which holds up well and doesn’t break down easily compared to other finishes. Because of its durability, this type of PCB plating is used in applications that involve mechanical contact, such as buttons and keypads.
Advantages:
Disadvantages:
Similar to tin, this PCB finish is used in high-speed signals that don’t contain any nickel. Immersion silver, however, does require unique storage as it will tarnish if exposed to air.
Advantages:
Disadvantages:
This three-layer metallic finish is used for printed circuit boards that also require wire bonding. The electroless nickel protects the copper and prevents it from coming into contact with the other metals. Palladium provides another anti-oxidation insurance layer and prevents the nickel from corroding, and the final gold layers adds more of a barrier against oxidation – plus it completely covers the PCB.
Advantages:
Disadvantages:
This PCB finish has been used for a long time and has the same wire bonding process as ENEPIG. The pad is a crowned surface, which means there is less area to land wires.
Advantages:
Disadvantages:
It’s important to pick the right PCB plating for your product. While there are a lot of available options, you want to consider the size and scope of your project – and budget.
For a solid overall option, ENIG offers a high quality finish and low-cost option with good solderability. You may, however, have to choose a finish based on a particular technology or requirement — such as HASL, which is military, aerospace, and space approved.
Selecting the right PCB surface finish can be a challenge, but we are here to help. Cirexx is your best-in-class solution for PCB layout, fabrication, and assembly. With more than four decades of experience, we have manufactured PCBs for almost every leading technology company – and we’ve worked with industries all over the world. Contact us today to learn more about what PCB surface finish you should choose for your next project or to connect with our experienced sales team.
Want more information on immersion tin 4layer ? Feel free to contact us.